Filter Adapter Tube
![]() |
Fractional distillation is the process to filter out components having different boiling points within a liquid. It is often used to single out the desired product after going through a chemical reaction. In fact, it is an intermediary step in multiple-step reaction series. Mentioned below is the procedure to set up a standard fractional distillation apparatus.
Step 1
Put the two stands one after the other within the reach of sink and rubber tubing. In the later stages, you would need to connect the rubber tubing to the sink faucet along with the condenser which can get difficult.
Step 2
Since you would need to attach one of the lab clamps to the lab stand, you would need to screw the open end at the back to offer a solid attachment for the metal rod on the stand.
Step 3
Next, put the round-bottomed flask within the clamp grip. Make sure that the flask opening is faced upwards.
Step 4
Now a few boiling chips need to be dropped into the flask.
Step 5
The round bottomed flask has to be fitted into the fractioning column within the opening.
Step 6
Now the Y adapter needs to be fitted on the top of the fractioning column.
Step 7
The other lab clamp should now be attached to the other lab stand. The clamp grips of this one has to be horizontal.
Step 8
Condenser Y needs to be connected to the Y adapter. For securing the connection well in place, use a connector clip.
Step 9
Now attach the vacuum adapter at the end of the condenser and again secure this connection using a connector clip.
Step 10
The collection flask should now be placed at the outflow of the vacuum adapter.
Step 11
Slip in the thermometer within the thermometer adapter and fix it on the top of the Y adapter. If everything has been done correctly, the thermometer would now be inside the Y adapter close to the adapter outflow within the condenser.
Step 12
A bunsen burner has to be placed under the round-bottomed flask.
Step 13
Fix the rubber tubing with the sink faucet. The higher opening on the condenser should be connected to the other end of the tube.
Step 14
Similarly, the lower opening on the condenser has to be attached with the other rubber tube and put the other end of the tube inside the sink.
Step 15
Finally, turn the faucet on slowly and steadily. It just needs a small water flow to cool the condenser as too much of water flow might end up the tube to pop off.
To know more about distillation apparatuses, click here.
|
|
Krups Filter Adapter $4.99 Filter Adapter |
|
|
Krups Filter adapter $3.99 Filter adapter |
|
|
52mm Lens Adapter Tube for Panasonic LX5 $3.95 - Lens adapter manufactured for Panasonic LUMIX DMC-LX5; - Works with 52mm UV filter, CPL filter, Camera lens, hood and cap or wide angle attachment; - Made of metal (not plastic); - color : black |
|
|
3M 502 Filter Adapter $9.99 3M 502 Filter Adapter |
|
|
Adapter,Filter,Cr $41.99 ADAPTER,FILTER,CR |
|
|
52mm LENS Adapter Tube for Panasonic LUMIX DMC-LX5 DMC-LX3 $2.54 Suits for PANASONIC LUMIX DMC-LX5/LX3 digital camera;Works with 52mm UV filter, CPL filter, Camera Lens Hood and Cap, close up lens or wide angle attachment;Brand new, never used;Made of metalColor : BlackPackage contents Included:1 X Adapter Tube Suitable For PANASONIC LUMIX DMC-LX5/LX3 Digital Dimension:Size: 31(H)*52(D)mm |
|
|
Groove Tubes Substi-Tube 928-Pr To El84 Adapter And Tube Sets $99.99 Groove Tubes Substi-Tube 928-PR to EL84 Adapter and Tube Sets |
|
|
Digital Camera Lens Adapter Tube for Panasonic FZ10/FZ20 $4.77 - A must have for the serious photographer- With this lens adaptor, you can easily use other lens filter - 100% brand new and high quality- For Panasonic FZ10/FZ20Dimensions: 2.83 in x 2.83 in x 1.26 inWeight: 2.22 oz |
|
|
58mm Lens Adapter Tube for Canon G10 G11 G12 Camera LA-DC58K $3.69 You can install any 58mm filter or lens after use this adapter, 100% same as original.Dual function: Using with Wide angle lens only requires to attach first part of this adapter. When using with Tele lens , use both parts of adapterAluminum adapter can screw onto the front of Digital Camera easily and allows to adding screw-on lenses or filters.Enhance the image quality and give extra protect on lensCompatibility: CANON PowerShot G10, G11, G12Dimesion: 52(H)*58(D)mm |
|
|
Digital Camera Lens Adapter Tube for Nikon 8800 $7.4 - A must have for the serious photographer- With this lens adaptor, you can easily use other 37mm lens filter - 100% brand new and high quality- For Nikon 8800 Dimensions: 2.48 in x 2.48 in x 2.52 inWeight: 2.65 oz |
|
|
37mm Digital Camera Lens Adapter Tube for Olympus $2.48 - A must have for the serious photographer- With this lens adaptor, you can easily use other 37mm lens filter - 100% brand new and high quality- For Olympus SP310Dimensions: 1.54 in x 1.54 in x 1.26 inWeight: 0.99 oz |
|
|
58mm Digital Camera Lens Adapter Tube for Canon $3.31 - A must have for the serious photographer- With this lens adaptor, you can easily use other 58mm lens filter - 100% brand new and high quality- For Canon A610/620/630Dimensions: 2.36 in x 2.36 in x 1.93 inWeight: 1.69 oz |
|
|
Mcnett 117338 Frontier Pro Filter $34.75 Aquamira Frontier Pro Ultralight water filter has all the benefits of a larger bottle filter in a compact size. Straw style filter attaches directly to water bottles or bladders (28mm thread adapter). Porous Plastic filter with Miraguard technology. Attached cap keeps mouthpiece clean. Prefilter lengthens filter life. Remove bite valve to use as hanging drip filter. Tube adapter draw tube included. Filters up to 50 gallons. |
|
|
Used Duncan Twin Tube W/Adapter $99.99 In Store Used USED DUNCAN TWIN TUBE W/ADAPTER |
|
|
58mm Lens Adapter Tube ring for Canon S5(Black) $4.64 - For owners of Canon digital camera with the models stated below who wishes to use a standard 58mm lens filter.- With this lens filter adaptor, you can easily use any 58mm lens filter with your Canon digital camera.- Made of aluminum.- With high quality |
|
|
Filter Adapter Nipple $9.95 Jagg Filter Adapter Nipple This Adapter Nipple is required to attach your Jagg Offset Filter Adapters to Jagg Oil Cooling Kits so you can extend the life of your Harley Davidson's engine. Jagg Off-Set Oil Cooler Adapter Jagg Off-Set Oil Cooler Adapter with Automatic Thermostat |
|
|
Stem Adapter Cone for Aqua Clear 50 and 70 $1.99 The Stem Adapter Cone is an Aqua Clear 402/802 adapter that allow the powerhead to fit on an undergravel filter uplift tube (5/8" to 1 1/8"). Size: 1 3/4" Long x 1 3/8" at the broad end. |
|
|
Extension Tube with Coupling for H.O.T. Magnum Canister Filter $4.99 Extension tube with C plug for the H.O.T. Magnum canister filter by Marineland. |
|
|
Eh Tube Zipper Envelope Filter Pedal $199.99 In Store Clearance EH TUBE ZIPPER ENVELOPE FILTER PEDAL |
|
|
First Filter Tube Designed by Dr. Charles Chamberland $49.99 First Filter Tube Designed by Dr. Charles Chamberland - Giclee Print |
|
|
Krups 871 CUP ADAPTER FOR SINGLE PC FILTER $6.99 871 CUP ADAPTER FOR SINGLE PC FILTER |
|
|
Vapamore VAPMR50FA Plastic Dust Filter Adapter $6 Vapamore VAPMR50FA Plastic Dust Filter Adapter |
|
|
BCI Pediatric Airway Adapter without Filter, 10/pk $100.95 BCI Pediatric Airway Adapter without Filter, 10/pk |
|
|
BCI Pediatric Airway Adapter with Filter, 10/pk $118.58 BCI Pediatric Airway Adapter with Filter, 10/pk |
|
|
Fenix Filter Adapter Fenix Filter Adapter $19.85 This is a filter which attaches to Fenix flashlights to give off penetrable red light. Made with a toughened ultra clear glass lens with AR coating and high temperature resistance. The filter seat uses the material PC 2805. Compatible with AA and cr123 Fenix flashlights. Note: This filter adapter will only work with the following lights in the Fenix Digital series: PD30 PD20 LD20 LD10 P3D P2D L1D L2D P1D L1T/L2Tv2.0. It will not work with first version L1T/L2T or the PD10+ or PD20+. |
|
|
Tube Adapter and Strainer Lift for Penguin 550 and 660 Powerheads $3.99 Tube adapter/strainer lift for the 550 or 660 power head by Marineland. |
|
|
Welch Allyn Gauge with Integrated Adapter for use with Two-Tube Cuffs $31.93 Welch Allyn Gauge with Integrated Adapter for use with Two-Tube Cuffs |
|
|
Bard Button Feeding Tube, Bolus with Straight Adapter, 28 FR $19.34 Bard Button Feeding Tube, Bolus with Straight Adapter, 28 FR |


US $12.97


















































































